just some reformatting - no code changes

src/IRBedroom.cpp

@@ -1,15 +1,13 @@
 #include <Arduino.h>
-#include <IRrecv.h>
-#include <IRsend.h>
-#include <IRremoteESP8266.h>
+#include <ESP8266WiFi.h>
 #include <IRac.h>
+#include <IRrecv.h>
+#include <IRremoteESP8266.h>
+#include <IRsend.h>
 #include <IRtext.h>
 #include <IRutils.h>
-
-#include <ESP8266WiFi.h>
 #include <PubSubClient.h>
 
-
 const uint16_t kIrLed = 4;  // ESP8266 GPIO pin to use. Recommended: 4 (D2).
 IRsend irsend(kIrLed);      // Set the GPIO to be used to sending the message.
 
@@ -30,12 +28,11 @@ const uint16_t kMinUnknownSize = 12;
 IRrecv irrecv(kRecvPin, kCaptureBufferSize, kTimeout, true);
 decode_results results;  // Somewhere to store the results
 
-
 // Update these with values suitable for your network.
-const char* ssid = "JoNelsDarlings";
-const char* password = "Paris2016";
-const char* mqtt_server = "mqtt.ddns.kawomi.com";
-//const String room_name = "IRLivingroom";
+const char *ssid = "JoNelsDarlings";
+const char *password = "Paris2016";
+const char *mqtt_server = "mqtt.ddns.kawomi.com";
+// const String room_name = "IRLivingroom";
 const String room_name = "IRBedroom";
 
 WiFiClient espClient;
@@ -46,7 +43,6 @@ char msg[MSG_BUFFER_SIZE];
 int value = 0;
 
 void setup_wifi() {
-
   delay(10);
   // We start by connecting to a WiFi network
   Serial.println();
@@ -69,38 +65,38 @@ void setup_wifi() {
   Serial.println(WiFi.localIP());
 }
 
-void callback(char* topic, byte* payload, unsigned int length) {
+void callback(char *topic, byte *payload, unsigned int length) {
   Serial.print("Message arrived [");
   Serial.print(topic);
 
-  String recBuf="";
+  String recBuf = "";
   Serial.print("] ");
   for (int i = 0; i < length; i++) {
     recBuf += (char)payload[i];
   }
   Serial.println(recBuf);
 
-  int numEle=1;
-  for (int i=0; i<recBuf.length() ; i++){
+  int numEle = 1;
+  for (int i = 0; i < recBuf.length(); i++) {
     if (recBuf.charAt(i) == ',') {
       numEle++;
     }
   }
-  recBuf+=",";
+  recBuf += ",";
 
   Serial.print("NumEle ");
   Serial.println(numEle);
 
-  int rawPos=0;
+  int rawPos = 0;
   uint16_t rawData[numEle];
-  String bufSingleNum="";
-  for (int i=0;i<recBuf.length();i++){
+  String bufSingleNum = "";
+  for (int i = 0; i < recBuf.length(); i++) {
     if (recBuf.charAt(i) != ',') {
-      bufSingleNum+=recBuf.charAt(i);
+      bufSingleNum += recBuf.charAt(i);
     } else {
       bufSingleNum.trim();
-      rawData[rawPos++]=bufSingleNum.toInt();
-      bufSingleNum="";
+      rawData[rawPos++] = bufSingleNum.toInt();
+      bufSingleNum = "";
     }
   }
 
@@ -115,7 +111,7 @@ void reconnect() {
     Serial.print("Attempting MQTT connection...");
     // Create a random client ID
     String clientId = String("ESP8266" + room_name);
-    //clientId += String(random(0xffff), HEX);
+    // clientId += String(random(0xffff), HEX);
     //  Attempt to connect
     if (client.connect(clientId.c_str())) {
       Serial.println("connected");
@@ -157,19 +153,16 @@ void setup() {
 #endif                  // DECODE_HASH
   irrecv.enableIRIn();  // Start the receiver
 
-
   irsend.begin();
 }
 
-
 void loop() {
-
   if (!client.connected()) {
     reconnect();
   }
   client.loop();
 
-/*  unsigned long now = millis();
+  /*  unsigned long now = millis();
     if (now - lastMsg > 2000) {
       lastMsg = now;
       ++value;
@@ -178,7 +171,7 @@ void loop() {
       Serial.println(msg);
       client.publish("IRBedroomReceivedIR", msg);
     }
-*/
+  */
   // Check if the IR code has been received.
   if (irrecv.decode(&results)) {
     // Display a crude timestamp.
@@ -190,19 +183,16 @@ void loop() {
     // Display the library version the message was captured with.
     Serial.println(D_STR_LIBRARY "   : v" _IRREMOTEESP8266_VERSION_ "\n");
     // Display the basic output of what we found.
-    String theResult,theSrc;
-    theResult=resultToHumanReadableBasic(&results);
-    theSrc=resultToSourceCode(&results);
+    String theResult, theSrc;
+    theResult = resultToHumanReadableBasic(&results);
+    theSrc = resultToSourceCode(&results);
     Serial.println(theSrc.c_str());
 
-    
-    bool isPub = client.publish(String(room_name + "/ReceivedIR").c_str(), theSrc.c_str());
+    bool isPub = client.publish(String(room_name + "/ReceivedIR").c_str(),
+                                theSrc.c_str());
     if (isPub)
       Serial.println("PUBLISHED");
     else
       Serial.println("PUBLISH FAILED");
-    
   }
-
-
 }